Representative example at 12 Months Interest Free Credit at 0% APR
£895
£89.5
£67.13
0%
Purchase price
Deposit
12 Monthly payment
Interest rate
Logic4training has three training routes to achieving the LCL Awards NVQ in Plumbing and Heating qualification, each designed for candidates with existing related qualifications and/or experience. We will assess your ability to determine which route is most appropriate.
A Level 2 Plumbing NVQ is a necessary requirement of application for a JIB Plumbing CSCS card, as well as WRAS/WIAPS Water Industry Approved Plumber Scheme.
The pre-assessment is priced from £195 +VAT and is required prior to taking this course.
For candidates who hold an LCL Awards Level 2 Plumbing & Heating Diploma
1-day training and assessment
+ Portfolio & Onsite Assessment
Logic4training delivers the LCL Awards Level 2 Plumbing & Heating Diploma as part of its comprehensive range of plumbing packages. If this has already been achieved, the NVQ element can simply be bolted on, topping up existing skills learnt in the classroom.
Route 1 is available to trainees who have completed the LCL Awards Level 2 Plumbing & Heating Diploma at any centre, not just Logic4training.
We will also need to know any other related qualifications you might hold, including:
- Domestic Gas ACS (CENWAT)
- OFTEC Oil
- HETAS
- WRAS
- Hot Water Systems & Safety (HWSS)
- Legionella
- Underfloor Heating
- Renewables (heat pumps/solar thermal)
Candidates will spend up to two days in the centre where they will receive an introduction to the NVQ, including a briefing session for the portfolio, which will be completed on site – a key part of the NVQ process.
Portfolio: To complete the portfolio, candidates must carry out two witnessed assessments for the installation of a bathroom and central heating/hot water system. These can be logged and uploaded using our e-portfolio platform. Included within the price is for Logic4training to carry out the On-Site assessments within a defined geographic area which is London and the Home Counties (Kent, Sussex, Surrey, Berkshire, Bucks, Beds, Herts, Essex). Anywhere outside of this area may incur an additional charge unless the onsite assessment can be carried out via a remote portal (subject to prior approval and requires specific equipment and Apps)
WRAS: A WRAS certificate is an entry requirement for the WIAPS Water Industry Approved Plumber Scheme, candidates who don’t already have this can add on for an extra cost (this is a one day, in-centre course).
For candidates who hold an alternative recognised plumbing qualification
1-day initial assessment
1-week in-centre training & assessment
+ Portfolio & Onsite Assessment
Route 2 is designed for candidates who have achieved a recognised plumbing qualification from City & Guilds, BPEC or EAL. Suitable qualifications include:
- City & Guilds Level 2 or 3 Plumbing Studies Technical (6129-33) or Craft (6035) Certificate
- BPEC Level 2 Diploma in Plumbing Foundation
- EAL Level 2 Intermediate Diploma in Plumbing
We will also need to know any other related qualifications you might hold, including:
- Domestic Gas ACS (CENWAT)
- OFTEC Oil
- HETAS
- WRAS
- Hot Water Systems & Safety (HWSS)
- Legionella
- Underfloor Heating
- Renewables (heat pumps/solar thermal)
Before training, candidates will be asked to confirm that they can confidently install and commission the following:
- Bathroom sanitary equipment
- Heat emitter (radiator or towel rail)
- Connections to drainage and supplies
- Pipework fabrication and commissioning
Candidates will be assessed on one of these elements, plus the regulations and theory for the installation of plumbing fixtures.
Assessment will take place over one day in-centre by practical assessment, online exam and through an interview where we will ask for details of your experience and plumbing work you may have undertaken.
All tools and materials will be provided.
Once the assessment is complete, candidates can move onto the NVQ element.
To complete the Level 2 Plumbing NVQ candidates spend one week in-centre, during which time they will undertake training and assessment for the following:
- Energy, waste and water conservation
- Water supply regulations and Bylaws
- NVQ briefing and portfolio session
Portfolio: To complete the portfolio, candidates must carry out two witnessed assessments for the installation of a bathroom and central heating/hot water system. These can be logged and uploaded using our e-portfolio platform. Included within the price is for Logic4training to carry out the On-Site assessments within a defined geographic area which is London and the Home Counties (Kent, Sussex, Surrey, Berkshire, Bucks, Beds, Herts, Essex). Anywhere outside of this area may incur an additional charge unless the onsite assessment can be carried out via a remote portal (subject to prior approval and requires specific equipment and Apps)
WRAS: A WRAS certificate is an entry requirement for the WIAPS Water Industry Approved Plumber Scheme, candidates who don’t already have this can add on for an extra cost (this is a one day, in-centre course).
For candidates with at least three years of industry experience, but no formal plumbing qualification
2-day initial assessment
3-weeks in-centre training and assessment
+ Portfolio & Onsite Assessment
We recognise that there are many trades people who have been working in the plumbing and heating sector for some time, but have not achieved a formal plumbing qualification. Route 3 is for this group, who have at least three years’ industry experience.
On successful completion of Route 3, candidates will have achieved the LCL Awards Level 2 Plumbing and Heating NVQ and Diploma. The Level 2 Plumbing Diploma normally takes six-weeks for complete new entrants.
We will assess your suitability, with an introductory conversation where will discuss your plumbing experience. You will need to provide supporting evidence in writing, such as your employment history/records.
We will also need to know any other related qualifications you might hold, including:
- Domestic Gas ACS (CENWAT)
- OFTEC Oil
- HETAS
- WRAS
- Hot Water Systems & Safety (HWSS)
- Legionella
- Underfloor Heating
- Renewables (heat pumps/solar thermal)
You will be asked to confirm that you can confidently install and commission the following:
- Bathroom sanitary equipment
- Heat emitter (radiator or towel rail)
- Connections to drainage and supplies
- Pipework fabrication and commissioning
Candidates will be assessed on two of these elements, plus the regulations and theory for the installation of plumbing fixtures.
Assessment will take place over two days in-centre by practical assessment, online exam and through interview where we will ask for details of your experience and plumbing work you may have undertaken.
All tools and materials will be provided.
Candidates who do not meet the requirements for Route 3 can complete the full Level 2 Plumbing and Heating Diploma. Click here for more information.
To complete the Level 2 Plumbing NVQ Diploma candidates spend three weeks in-centre, during which time they will undertake training and assessment for the following:
- Health & Safety Regulations
- Energy, waste and water conservation
- Fault finding for hot & cold water systems and central heating
- Electrical installation of plumbing and heating system components, including safe isolation
- Installation and maintenance of about ground drainage systems
- Water supply regulations and Bylaws
- NVQ briefing and portfolio session
Portfolio: To complete the portfolio, candidates must carry out two witnessed assessments for the installation of a bathroom and central heating/hot water system. These can be logged and uploaded using our e-portfolio platform. Included within the price is for Logic4training to carry out the On-Site assessments within a defined geographic area which is London and the Home Counties (Kent, Sussex, Surrey, Berkshire, Bucks, Beds, Herts, Essex). Anywhere outside of this area may incur an additional charge unless the onsite assessment can be carried out via a remote portal (subject to prior approval and requires specific equipment and Apps)
WRAS: A WRAS certificate is an entry requirement for the WIAPS Water Industry Approved Plumber Scheme, candidates who don’t already have this can add on for an extra cost (this is a one day, in-centre course).
The JIB-PMES CSCS Registration Scheme
Providing professional, industry recognised registration cards for operatives working in the plumbing and mechanical engineering services sector and related occupations.
Click Here for more information.
Your latest offers & alerts